Please use ample lubrication with your Thruster. The Thruster is designed to operate with minimal resistance. The less resistance, the better it works.
Do not bend the shaft or drop your Thruster, as the unit may damage or break, voiding any warranty.
How to Use:
Your new Naked Addiction Thruster should come with a small initial charge and be travel locked out of the box. If it does not have a charge, charge it using the instructions in the charging section below.
The Thruster is controlled by two buttons. The top button increases the thrusting speed, and the bottom button is for turning ON/OFF and decreasing the thrusting speed.
Remote
The remote controls the Thruster with two buttons. The top button increases the thrusting speed, and the bottom button is for decreasing the thrusting speed.
Once your Thruster is turned on/in standby mode, press the top button on the remote to activate first speed. Quickly press the top button to go through all 7 speeds. To go back to a previous speed, quickly press the bottom button.
To enter standby mode at any time press and hold the bottom button for 2 seconds.
To turn off, press and hold the bottom button at the base of the Thruster for 2 seconds. The remote will not turn off the Thruster completely, it will only enter standby mode.
Cleaning:
It is important to clean your product with toy cleaner before and after every use. To clean, simply spray or pump the cleaner onto a cloth or directly onto the applicable surface, and wipe. Rinse away the cleaner with water and leave the product to air dry.
Always unplug before cleaning and allow to completely dry before use. Do not use any type of solvents such as alcohol or benzene, which may damage not only the finish, but the product itself. To avoid shock, keep the USB cord free from tangling and inspect it for damage frequently.
Note: Naked AddictionTM Thruster is water resistant. Wipe clean with a damp cloth and toy cleaner or warm, soapy water. Do not submerge.
Charging:
Insert the pin of the USB cord into the charge port located next to the buttons on the Thruster, and then plug the USB cord into a USB wall adaptor. The LED light will glow indicating that the unit is charging. When the unit is fully charged, the light will disappear. After charging is complete, the Thruster will unlock automatically and be ready for use.
If the product will not be used for long periods of time, the battery should be recharged at least once every three months. If possible, avoid fully draining the battery. Charge often between uses to prolong battery life. Only charge with the USB cord provided.
Health and Safety Precautions:
• Do not charge near water.
• Do not charge if the USB cord appears damaged.
• Do not use other USB cords with your product if the one provided is misplaced.
• Do not drop on the floor, it will damage your product.
• Do not try to bend the shape, it will damage your product.
• Do not put the product in the dishwasher or microwave, it will damage your product.
• This product is sold as a novelty only. It is not intended for medical applications or any use that has an adverse effect on any function of the body.
• Use a toy cleaner for all your cleaning needs, before and after use.
• To avoid injury or aggravation of pre-existing physical conditions, this device should not be used on swollen or inflamed areas of the skin. Wash before and after use. Do not share with other sexual partners. Help to prevent other sexual diseases through the use of condoms, sexual education, proper judgement and rigorous, diligent care.
• Never let children play with this product.
• In case of pregnancy, diabetes or illness, consult your physician before use.
• When travelling, always make sure this product has been properly turned off and locked.
• Do not use if the silicone appears broken or damaged.
• Only use a water-based lubricant with this product, as silicone-based lubricants have been known to damage silicone products.
Storage:
Avoid extreme heat.
When not in use, store this product in a cool, dry place away from the reach of children.
Keep your product in a dust free location and away from contact with any other similar material or products.
WARNING: DO NOT USE silicone based lubricants with this silicone product as it damages the finish and will void warranty. Use water based lubricants only.