All SWAN products are powered by PowerBullet®†.
†Top brands from around the world trust PowerBullet® technology
to provide the deepest and most intense vibrations in their products. For more
information, visit www.powerbullet.ca
Getting Started:
SWAN is your direct link to ultimate sensual pleasure.
Follow the guidelines below to obtain the safest and most satisfying
experience.
1. Charging - plug the USB cord into the SWAN and charge for
at least 3 hours.
Please Note: Some USB chargers may recharge at a slower rate. If you would like
a full charge, always make sure the red LED light has disappeared.
2. Lock Feature - lock and unlock your SWAN by pressing down
both buttons simultaneously for at least four seconds.
3. “Press and Hold” Feature - SWAN all-speed controls work
on a “Press and Hold” function.
4. Cleaning - wash your product before and after use.
Prepare for an exhilarating adventure and discover your most
hidden and unknown desires.
Reminder: In order to protect and prevent any damage to your
SWAN, we suggest using the highest quality water-based lubricants.
Lock Feature:
VERY IMPORTANT: All SWAN products come from the factory
locked. To unlock, simply hold down both buttons at once for at least four
seconds. Both LED lights will flicker for a moment, and then disappear. You may
let go at this point. Give it a test by pressing one of the buttons. To lock again,
press both buttons for another four seconds. Once again, the lights will flicker
for a moment, and then disappear. Use this feature for transporting your SWAN product.
“Press and Hold” Feature:
SWAN is proud to introduce the new “Press and Hold” function
that mimics the natural escalation of human passion. The longer you press and
hold the button, the more the vibration intensifies. This innovative technology
has you lost in your thoughts and holding on for more pleasure.
Instructions:
• To begin, “Press and Hold” the button for one or two
seconds and then let it go at your desired speed.
• To increase this vibration, simply “Press and Hold” again
and let go at your desired speed.
• To turn off, press the button again quickly.
Charging:
Your SWAN product is powered by a lithium battery which is
the best battery available for our SWAN line of products. Please refer to the
specifications page for detailed charging times. Once the USB cord is properly
inserted into the SWAN product and then into a compatible USB charging adapter,
a red LED light will glow indicating that the unit is charging. When the unit
is fully charged, the light will disappear.
If the SWAN will not be used for long periods of time, the
battery should be recharged at least once every three months. Only charge with
the USB cord provided. Your unit will not operate while charging, and will
automatically be in the unlocked state when unplugged.
Cleaning:
SWAN is easy to care for. Wash it with mild soap and water
before and after each use.
SWAN products will dry quickly after washing (since silicone repels water, most
of the water will run off). The seamless design of SWAN will protect you
against any bacteria usually found between seams. Do not use any type of
solvent such as alcohol or benzene, which may damage not only the finish, but
the product itself. Avoid extreme heat. After submerging, always let the product
dry thoroughly before recharging. It’s best to keep your SWAN product in a dust
free
location, and away from contact with any other similar materials or products. Do
not use if the silicone appears broken or damaged.
Health and Safety Precautions:
Do not charge near water.
Do not charge if the USB cord appears damaged. Do not use other USB cords with
your product if you have lost the one provided. Contact www.swanvibes.com for
more information about adapters. As USB wall charging adapters vary by country,
be sure to use the proper one for your area. Do not use the product while it is
charging.
Do not put the product in the dishwasher or microwave because it will damage
your product and void the warranty.
This product is sold as a novelty only. It is not intended for medical
applications or any use that has an adverse affect on any function of the body.
Use a toy cleaner for all your cleaning needs, before and after use.
To avoid injury or aggravation of pre-existing physical conditions, this device
should not be used on swollen or inflamed areas of skin. Wash before and after
use. Do not share with other sexual partners. Help to prevent other sexual
diseases through the use of condoms, sexual education, proper judgment and
rigorous, diligent care.
Never let children play with this product. In case of pregnancy, diabetes or
illness, consult your physician before use. SWAN products are powerful due to PowerBullet®
technology and are intended to be used for pleasure. Should any discomfort or
pain result, consult your physician.
When traveling, always put your SWAN in the “lock” mode if available.
Troubleshooting:
When I press the button, it does not vibrate.
• Lock feature is activated. Press the two buttons simultaneously
and hold for 4 seconds to unlock.
• Unit is not charged, plug in for a minimum of approximately 30 minutes.
When I press and hold the button, it vibrates and then stops
when I let go.
• Double-pressing the button will cause it to turn on and turn
off. Make sure to press and hold the button until it reaches the desired
vibration speed and then let go without pressing a second time.
When I press and hold the button, the speed doesn’t change.
• Once the light stops flashing, you have reached the
highest speed.
I want to gradually increase speed as I go along, but it
always stops and then I have to press and hold again for longer each time.
• You can increase speed by pressing and holding the button.
If you do not press and hold long enough (more than two seconds), the vibrator
will turn off.
The vibrator goes on by itself.
• Unit feature needs to be locked; otherwise it will go on
at the slightest touch as a minimal vibration.
The light on the button does not go on.
• The vibrator is running low on charge or power. Charge it
by inserting the USB cord into the charge connection port on your SWAN and
either a USB wall adapter or USB port on your computer.
I dropped the vibrator, is it broken?
• Like all electronic devices, SWAN is a delicate product
that can get damaged internally. It is possible that your vibrator could be
broken. To test it, lock and unlock the vibrator, plug the adaptor into the
charge connection port, charge the device and check its performance.
My vibrator is taking longer than indicated to charge.
• USB charging is very advanced and can act as a fast and
convenient method to charge you SWAN. In some rare cases, charging may take
longer in certain power sources than others. Please be advised that for maximum
results, it is suggested to plug the USB charging cable into a USB 2.0 or
higher wall adapter for your region. Charging in a computer USB adapter is
still eff ective, but may require a longer period of time to achieve a full
charge.
The Trumpeter Swan 1-YEAR LIMITED WARRANTY:
All SWAN products offer a complimentary 1-year limited
warranty for any defects in materials and workmanship from the date of original
retail purchase. This is strictly limited to the repair or replacement of the
purchased product and does not cover damage or tears and rips in the silicone caused
by physical or natural destruction, misuse, or other external causes. Any
attempt to disassemble the SWAN product will result in the withdrawal of
warranty privileges. The customer is responsible for all shipping and handling
costs along with proof of date of purchase (hold on to your receipt). SWAN must
be notified about your return item before sending out the product. SWAN reserves
the right to refuse and return damaged items that do not follow the above description
after inspecting the returned item. All shipping, importing, and returning
costs are non-refundable and will be charged to the customer. If SWAN decides
to replace the component, the replacement will not extend the life of this
warranty. SWAN will not accept any additional charges for work performed by the
customer or a third party unless it is authorized by www.swanvibes.com. All SWAN
products are sold as novelty items only.
HOW TO CLAIM YOUR 10-YEAR GUARANTEE:
SWAN is proud to provide an extended 10-year guarantee to
its very appreciated customers. Register at the SWAN website within one year of
your original purchase and you will have a 10-year quality guarantee in
addition to our 1-year warranty. The 10-year guarantee provides you with an
unbelievable 50% off on your purchase of a new product of equal or lesser
value. We are aware that products do not last forever, so we will do our best
to ensure you love our products as well as our company. Special offer
restricted to a one-time only basis. Therefore, the new discounted item will
not include a warranty.
Register now @ www.swanvibes.com/register