top left cornertop left corner
← All Product Manuals

Product Manual for Leaf+ Vitality+

Leaf+ Vitality+

All leaf+ products are powered by PowerBullet®.

Top brands from around the world trust PowerBullet® technology to provide the deepest and most intense vibrations in their products. For more information, visit

Getting Started:

leaf+ is your direct link to natural pleasure. Follow the guidelines below to obtain the safest and most satisfying experience.

1. Charging – please plug the USB cord into the leaf+ and charge for at least 3 hours prior to your first use.

Please Note: Some USB chargers may recharge at a slower rate. If you would like a full charge, always make sure the red LED light has disappeared.

2. Lock Feature – lock/unlock your leaf+ for worry free travel.

3. Intensity and Function Settings – leaf+ features 3 vibration intensities and 2 function settings.

4. Cleaning – wash your product before and after use.

Prepare for a naturally beautiful experience and take a journey in discovering a plateau of pleasure that can only be experienced with leaf+.

Reminder: always use a water based lubricant to achieve the greatest gratification.

Lock Feature:

VERY IMPORTANT: All leaf+ products come from the factory locked.

To unlock, hold down both buttons for 4 seconds until you see both LED lights appear. To lock again, repeat this process until you see both LED lights disappear.

Intensity and Function Settings:

For your enjoyment, leaf+ is equipped with 3 vibration intensities and 2 function settings in each tip. This gives you full control and allows you to change the way you enjoy your leaf+ with the single press of either button.

Each vibration is independently controlled. This means you can use one or both vibrations at a time, depending on which button you press.

Vibration Intensities:

With your leaf+ off and unlocked:

Press once for a low vibration
Press twice for a medium vibration
Press 3 times for a high vibration


With your leaf+ off and unlocked:
Press 4 times for a wave vibration
Press 5 times for a pulse vibration

To turn off, progress through to the end of the intensity and function settings of each active vibration or hold down the button while on any vibration for 1 second to deactivate. You can also hold down both buttons simultaneously to instantly turn off both vibrations.

Vibration Memory:

Your leaf+ is able to remember your favourite vibration setting. Once you have set a desired vibration, press the button to that vibration for 1 second until it turns off. The next time you turn it on, it will start at that same vibration. To clear the memory, quickly press both buttons at the same time, or lock and unlock your leaf+.


Your leaf+ product is powered by a lithium battery, which is the best battery available for the leaf+ line of products. Charging may vary depending on the size of the battery and the extent of its power level. Once the USB cord is properly inserted into the leaf+ product and then into a compatible USB wall charging adapter, a red LED light will glow indicating that the unit is charging. When the unit is fully charged, the light will disappear. If the leaf+ will not be used for long periods of time, the battery should be recharged at least once every three months. Only charge with the USB cord provided. Your unit will not operate while charging, and will automatically be in the unlocked state when unplugged.


leaf+ is easy to care for. Be sure to wash it with a toy cleaner before and after each use. leaf+ products will dry quickly after washing (since silicone repels water, most of the water will run off). The seamless design of leaf+ will prevent it from harboring any bacteria that is usually found between seams. Do not use any type of solvent such as alcohol or benzene, which may damage not only the finish, but also the product itself. Avoid extreme heat. After submerging, always let the product dry thoroughly before recharging. It is best to keep your leaf+ product in a dust free location, and away from contact with any other similar materials or products. Do not use if the silicone appears broken or damaged.

Health and Safety Precautions:

Do not charge near water.
Do not charge if the USB cord appears damaged. Do not use other USB cords with your product if you have lost the one provided. Contact for more information. As USB wall charging adapters vary by country, be sure to use the proper one for your area. Do not attempt to use the product while it is charging.
Do not put the product in the dishwasher or microwave because it will damage your product and void the warranty.
This product is sold as a novelty only. It is not intended for medical applications or any use that has an adverse effect on any function of the body. Always use a water-based lubricant.
Use a toy cleaner for all your cleaning needs, before and after use.
To avoid injury or aggravation of pre-existing physical conditions, this device should not be used on swollen or inflamed areas of the skin. Do not share with other sexual partners.
Help prevent other sexual diseases through the use of condoms, sexual education, proper judgment and rigorous, diligent care.
Never let children play with this product. In cases of pregnancy, diabetes or illness, consult your physician before use. leaf+ products are powerful due to the PowerBullet® core and are intended to be used for pleasure. Should any discomfort or pain result, consult your physician.
When traveling, always put your leaf+ in the “lock” mode if available.


When I press a button, it does not vibrate.

• Lock feature is activated. To unlock, press and hold both buttons for approximately 4 seconds until you see both lights appear.
• Unit is not charged. Plug in for a minimum of approximately 30 minutes.

The vibrator goes on by itself.

• Unit needs to be locked; otherwise it may go on at the slightest touch.

The light on the button does not go on.

• The vibrator is running low on charge or power. Charge it by inserting the UBS cord into the charge connection port on your leaf+ and either a USB wall adapter or USB port on your computer.

I dropped the vibrator, is it broken?

• Like all electronic devices, leaf+ is a delicate product that can get damaged internally. It is possible that your vibrator could be broken. To test it, lock and unlock the vibrator, plug the USB cord into the charge connection port, charge the device and check its performance.

My vibrator is taking longer than indicated to charge.

• USB charging is very advanced and can act as a fast and convenient method to charge your leaf+. In some rare cases, charging may take longer in certain power sources than others. Please be advised that for maximum results, it is suggested to plug the USB charging cable into a USB 2.0 or higher wall adapter for your region. Charging in a computer USB adapter is still effective, but may require a longer period of time to achieve a full charge.

The vibrations keep starting from the beginning and not the one I last set in memory.

• leaf+ allows you to set your favourite vibration into its memory for the next use. It is erased when you lock and unlock your product or hold down both buttons at the same time.


All leaf+ products are tested for material and electrical safety and are RoHS Compliant and CE Certified.

Battery: Lithium 180MAH 3.7V
Run Time: Up to 3 hours.
Vibrating Frequency: 2000-9000 RPM
Adapter: Input: AC 100-240V 50/60HZ Output: 5V\0.5A
Weight: 82g±5% (not including USB cord)
Composition: 100% high grade silicone, ABS, metal, latex free. Electronic devices.
Charging Time: Approximately 2.5 hours

Hey there! Even though you might not mind the markings, some people do. So for those people, we just wanted to say sorry for having all those little symbols on your product. Unfortunately, we are forced to put them on due to international laws, so please do not be mad at us. Look on the bright side though, we made them very smooth and the same color as the rest of your toy so you more than likely will not really notice them anyway.


All leaf+ products offer a complimentary 1-year limited warranty for any defects in materials and workmanship from the date of original retail purchase. This is strictly limited to the repair or replacement of the purchased product and does not cover damage or tears and rips in the silicone caused by physical or natural destruction, misuse, or other external causes. Any attempt to disassemble the leaf+ product will result in the withdrawal of warranty privileges. The customer is responsible for all shipping and handling costs along with proof of date of purchase (hold on to your receipt). leaf+ must be notified about your return item before sending out the product. leaf+ reserves the right to refuse and return damaged items that do not follow the above description after inspecting the returned item.

All shipping, importing, and returning costs are non-refundable and will be charged to the customer. If leaf+ decides to replace the component, the replacement will not extend the life of this warranty. leaf+ will not accept any additional charges for work performed by the customer or a third party unless it is authorized by All leaf+ products are sold as novelty items only.

Register now @

Product Line


bottom left cornerbottom right corner