How to Use:
Your Throb should
come with a small initial charge and be travel locked out of the box. If it
does not have a charge, charge it using the instructions in the charging
section below.
The Throb is
controlled by one button (figure 1) for travel lock, power, speed and
functions.
Travel Lock:
To lock/unlock,
press and hold the button for 4 seconds, or until you feel 2 quick pulsations.
ON/OFF:
To turn on, press the
button once. The LED Light will light up and stay lit when the Throb is on.
To turn off, press
and hold the button for 2 seconds.
Functions:
Quickly press the
button to cycle through all 7 dynamic functions of pulsation.
Remote:
The remote controls
the Throb with 2 buttons. The top button is for cycling through the functions of
pulsation and activating incremental speed control. The bottom button is for
bringing you back to the previous function and entering standby mode.
Once the Throb is
turned on, quickly press the top button to cycle through all 7 dynamic
functions of pulsation. To go back to the first function, press the bottom
button once.
Once the Throb is
turned on, press and hold the top button to activate incremental speed control.
Release the button once you have reached the desired intensity.
To enter standby
mode at any time, press and hold the bottom button for 2 seconds.
The remote will not
turn off the Throb completely, it will only enter standby mode.
Auto Off:
If the product is
left in standby mode without use for more than 10 minutes, it will
automatically turn off to preserve battery life.
Cleaning:
It is important to
clean your product with toy cleaner before and after every use. To clean,
simply spray or pump the cleaner onto a cloth or directly onto the applicable
surface, and wipe. Rinse away the cleaner with water and leave the product to
air dry.
Always unplug before
cleaning and allow to completely dry before use. Do not use any type of
solvents such as alcohol or benzene, which may damage not only the finish, but
the product itself. To avoid shock, keep the USB cord free from tangling and
inspect it for damage frequently.
Charging:
Connect the charger to the magnetic charging contacts on the
vibrator. The charger should snap into place. Plug the other end into a USB
wall adapter. The LED light will glow indicating that the unit is charging.
When the unit is fully charged, the light will disappear. After charging is
complete, the Throb will unlock automatically and be ready for use.
If the product will not be used for long periods of time,
the battery should be recharged at least once every three months. If possible,
avoid fully draining the battery. Charge often between uses to prolong battery
life. Only charge with the USB cord provided.
Health and Safety Precautions:
Do not charge near water.
Do not charge if the USB cord appears damaged.
Do not use other USB cords with your product if the one
provided is misplaced.
Do not drop on the floor, it will damage your product.
Do not put the product in the dishwasher or microwave, it
will damage your product.
This
product is sold as a novelty only. It is not intended for medical applications
or any use that has an adverse effect on any function of the body.
Use a toy
cleaner for all your cleaning needs, before and after use.
To avoid
injury or aggravation of pre-existing physical conditions, this device should
not be used on swollen or inflamed areas of the skin. Wash before and after
use. Do not share with other sexual partners. Help to prevent other sexual
diseases through the use of condoms, sexual education, proper judgement and
rigorous, diligent care.
Never let
children play with this product.
In case of
pregnancy, diabetes or illness, consult your physician before use.
Storage:
Avoid
extreme heat.
When not in
use, store this product in a cool, dry place away from the reach of children.
Specifications:
All Lux Active products are tested for material and
electrical safety and are RoHS Compliant and CE Certified.
Battery: Lithium 500mAh
Run Time: Up to 40 minutes
Vibrating Frequency: 240 RPM
Output: 3.7V
Weight: 127.5g (not including USB cord)
Composition: ABS, Silicone
Charging Time: Approximately 2 hours