top left cornertop left corner
← All Product Manuals

Product Manual for Simple & True 6.5 inch Jelly Arousal Vibe

Simple & True 6.5 inch Jelly Arousal Vibe
2 “AA” Batteries Required.

Always use a rubber compatible lubricant with this product for maximum pleasure.

Help to prevent other sexual diseases through the use of condoms, sexual education, proper judgement and rigorous, diligent care.

To avoid injury of aggravation of pre-existing conditions, this device should not be used on swollen or inflamed areas of skin.

Use a toy cleaner for all your cleaning needs, before and after every use.

Do not share with other sexual partners.

Remove batteries when not in use.

Wash before and after use.

ELECTRICAL MALFUNTION
Should your item not work or vibrate as expected once batteries are inserted, you should do the following:
1. Re-check your batteries are inserted properly. Positive in the positive terminal and negative in the negative terminal etc.
2. Make sure your batteries are new and that they were all inserted at the same time. Do not use old batteries with new batteries.
3. Check your contact points to ensure they are touching the batteries contact points. They may need minor adjustments. You can do this by pulling them out very gently and by a minimum amount, be careful not to over pull.

INSTRUCTIONS FOR USE
1. After use, switch off your vibrator.
2. Remove all batteries from the item to preserve their life and stop corrosion that may occur from the batteries.
3. Clean the vibrator thoroughly with a toy cleaner after every use, and store in a cool dry place.

Product Line

Information


newsletter
 
bottom left cornerbottom right corner