for 3 seconds until you feel 2 quick vibrations. If at any time during the process, the LED light on
the side goes out, stop pressing the button and start over. The LED light above the button will
blink slowly to indicate once the SWAN is on. Repeat the process to turn it off at any time. It is
important to make sure that your SWAN is OFF after every use to prolong battery life.
ATTENTION: When this SWAN is turned on, it performs a quick calibration of the sensor.
It is important that you are not squeezing the sides when turning it on or it may aff ect the
vibration strength. If this does happen, turn off and on again without squeezing the sides
to reset the sensor.
Vibration Modes: This SWAN has 2 different ways to use it as described below. To change from Free-
Squeeze mode to Mimic Mode, ensure that the SWAN is not vibrating. When the SWAN is first turned on, it
will be in Free-Squeeze Mode.
Free-Squeeze Mode: Free-Squeeze lets you enjoy your SWAN as you like it. Position the tip of the SWAN
where you want and then squeeze the sides around the button. The softer you squeeze, the softer the
vibration – the stronger you squeeze, the stronger the vibration. In this mode, the LED light will slowly fade
in and out when it is on and will be solid while vibrating.
In Free-Squeeze Mode, you are able to Speed Lock the vibration to a constant speed. First, find the
vibration intensity you want and then quickly press the button while maintaining the desired speed. The
vibration will stay at this speed until you press the button again. Once the button is pressed, your SWAN
will return to regular Free-Squeeze Mode.
Mimic Mode: Enter Mimic Mode while the unit is not vibrating in Free-
Squeeze Mode by pressing the button. In Mimic mode, you are free to design
your own vibration pattern in a fun and simple way. Create your vibration by
squeezing the sides around the button whichever way you would like for up
to 20 seconds. While you are designing your vibration pattern, the top LED
light will quickly blink as it waits for input. Once the vibrator has detected a
period of 3 seconds with no input, your vibration pattern, as you made it, will
begin to repeat itself and the LED light will turn solid. If you do not squeeze at
all, it will return to Free-Squeeze Mode after 7 seconds.
Auto OFF Feature: This product also features a power saving Auto Off feature. After 30 minutes of
inactivity, your SWAN will automatically turn itself off to preserve battery life allowing you to enjoy it more
often between charges. Turn it on by pressing and holding the button for 3 seconds until you feel your
SWAN quickly vibrate.
Charging: Plug the USB cord into the SWAN and charge for at least 3 hours. The side LED charging light
will pulse while it is charging. When it is fully charged, the light will disappear. Once the product has
completed charging and is unplugged, it will already be on and ready for use. Please Note: Some USB
chargers may recharge at a slower rate. If you would like a full charge, always make sure the charging light
has disappeared.
Your SWAN product is powered by a lithium battery which is the best battery available for our SWAN line
of products. Please refer to the specifications page for detailed charging times.
If the SWAN will not be used for long periods of time, the battery should be recharged at least once every
three months. Only charge with the USB cord provided. Your unit will not operate while charging, and will
automatically be turned on when unplugged.
Lubricants: When using directly on the skin, we suggest you use a lubricant for the most pleasure.
Always choose a water-based lubricant as other types may deteriorate the silicone finish.
Do not use if the silicone appears broken or damaged.
Cleaning: Wash your product before and after use.
SWAN is easy to care for. Wash it with mild soap and water before and after each use. SWAN
products will dry quickly after washing (since silicone repels water, most of the water will run off ).
The seamless design of SWAN will protect you against any bacteria usually found between seams.
Do not use any type of solvent such as alcohol or benzene, which may damage not only the finish,
but the product itself. Avoid extreme heat. After submerging, always let the product dry thoroughly
before recharging. It’s best to keep your SWAN product in a dust-free location, and away from contact
with any other similar materials or products.
Health and Safety Precautions:
Do not charge near water.
Do not charge if the USB cord appears damaged.
Do not put the product in the dishwasher or microwave because it will damage your product and void
the warranty.
Do not use other USB cords with your product if you have lost the one provided.
Contact www.swanvibes.com for more information about adaptors. As USB
wall charging adapters vary by country, be sure to use the proper one for your area. Do not use the
product while it is charging.
This product is sold as a novelty only. It is not intended for medical applications or any use that has an
adverse affect on any function of the body. Use a toy cleaner for all your cleaning needs, before and after
use.
To avoid injury or aggravation of pre-existing physical conditions, this device should not be used on
swollen or inflamed areas of skin. Wash before and after use. Do not share with other sexual partners. Help
to prevent other sexual diseases through the use of condoms, sexual education, proper judgement and
rigorous, diligent care. Never let children play with this product. In case of pregnancy, diabetes or illness,
consult your physician before use. SWAN products are powerful due to PowerBullet® technology and are
intended to be used for pleasure. Should any discomfort or pain result, consult your physician.
When travelling, always make sure your SWAN has been properly turned off using the On/Off Control
instructions in this manual.
Troubleshooting:
I have to press very hard on the pressure sensitive areas for the product to vibrate.
• The internal sensors need to be recalibrated. Turn the product on/o. using the instructions in the “On/Off Control” section of this manual.
There are no vibrations when I apply pressure to the vibrator.
• The vibrator is running low on charge or power. Charge it by inserting the USB cord into the charge connector. Charge for a minimum of approximately 30 minutes.
• Unit is off. Follow the On/O. Control instructions in this manual to turn on.
• Be sure to apply pressure to the pressure sensitive areas. Refer to the diagram in this manual.
How do I increase the intensity of the vibrations?
• You can increase speed by applying a stronger squeeze to the Pressure Sensitive Areas.
The Auto Off will not activate.
• The Automatic Off won’t activate unless the vibrator is left untouched for a minimum of 30 minutes.
The vibrator goes on by itself.
• Unit needs to be turned off; otherwise it will go on at the slightest touch as a minimal vibration.
The LED light does not go on.
• The vibrator is running low on charge or power. Charge it by inserting the USB cord into the charge connection port on your SWAN and either a USB wall adapter or USB port on your computer.
I dropped the vibrator, is it broken?
• Like all electronic devices, SWAN is a delicate product that can get damaged internally. It is possible that your vibrator could be broken. To test it, turn it off, plug the adaptor into the charge connection port, charge the device and check its performance.
My vibrator is taking longer than indicated to charge.
• USB charging is very advanced and can act as a fast and convenient method to charge your SWAN. In some rare cases, charging may take longer in certain power sources than others. Please be advised that for maximum results, it is suggested to plug the USB charging cable into a USB 2.0 or higher wall adapter for your region. Charging in a computer USB adapter is still effective, but may require a longer period of time to achieve a full charge.
1-YEAR LIMITED WARRANTY:
All SWAN products offer a complimentary 1-year limited warranty for any defects in materials and workmanship from the date of original retail purchase. This is strictly limited to the repair or replacement of the purchased product and does not cover damage or tears and rips in the silicone caused by physical or natural destruction, misuse, or other external causes. Any attempt to disassemble the SWAN product will result in the withdrawal of warranty privileges. The customer is responsible for all shipping and handling costs along with proof of date of purchase (hold on to your receipt). SWAN must be notified about your return item before sending out the product.
SWAN reserves the right to refuse and return damaged items that do not follow the above description after inspecting the returned item. All shipping, importing, and returning costs are non-refundable and will be charged to the customer. If SWAN decides to replace the component, the replacement will not extend the life of this warranty. SWAN will not accept any additional charges for work performed by the customer or a third party unless it is authorized by www.swanvibes.com. All SWAN products are sold as novelty items only.
HOW TO CLAIM YOUR 10-YEAR GUARANTEE:
SWAN is proud to provide an extended 10-year guarantee to its very appreciated customers. Register at the SWAN website within one year of your original purchase and you will have a 10-year quality guarantee in addition to our 1-year warranty. The 10-year guarantee provides you with an unbelievable 50% off on your purchase of a new product of equal or lesser value. We are aware that products do not last forever, so we will do our best to ensure you love our products as well as our company. Special offer restricted to a one-time only basis. Therefore, the new discounted item will not include a warranty.
Register now www.swanvibes.com/register